Bioaccumulation of heavy elements by Armadillidium vulgare (Crustacea,Isopoda) exposed to fallout of a municipal solid waste landfill

This paper reports the response of isopods exposed to fallout of a municipal solid waste landfill located in central Italy. Soil samples and specimens of Armadillidium vulgare were collected at different distances from the landfill and analyzed to determine the concentrations of heavy elements such as As, Cd, Co, Cr, Cu, Ni, Pb, Sb, V and Zn. The isopod analysis was performed on unpurged and purged specimens. Analytical data indicate that the soil contents of heavy elements were quite uniform and within the respective local geochemical background. Slight enrichments of Cu and Pb were found in some soils collected within the solid waste. Purged isopods showed an accumulation of As, Co, Cr, Ni, Sb and V whose body levels decreased as the distance from the landfill increased. Cd, Cu, Pb and Zn concentrations in purged specimens were rather uniform and no significant variation trend occurred. This result probably was due to the fact that the isopods are provided with physiological mechanisms of regulation for these heavy elements. Analytical data also indicate the ability of A. vulgare to adsorb differently the heavy elements according to the following order: As > Co > Ni > Pb > V. The contents of heavy elements in unpurged specimens were higher than in purged ones. This finding suggested that the defecation has marked effects on the tissue levels of heavy elements in isopods. This study indicates that the isopods provide useful information about environmental quality in areas characterized by low and discontinuous emission of heavy elements and their low accumulation in soil.     

Dynamic features of cells expressing macrophage properties in tissue cultures of dissociated cerebral cortex from the rat

Summary Two previously identified forms of macrophage were investigated in primary cultures of cerebral cortical cells. Dynamic features were revealed through time-lapse video recording and aspects of macrophage function were assessed. The two cell forms were shown to be different pre-mitotic stages of a single cell type. The cell cycle for these cells involved an initial large, flat, quiescent cell which retracted to yield a slightly rounded form with numerous processes. This latter form lost processes and developed profuse filopodia as it became very rounded just prior to division; both resulting daughter cells then regained the initial large flat appearance. These cells possessed several properties of macrophages, including phagocytosis, nucleoside diphosphatase enzyme, and CR3 receptors. These properties were transient, expressed just before and after mitosis, but subsequently down-regulated in the flat daughter cells. Because of this feature, it was difficult to determine the exact size of this cell population; however, the observed rate of proliferation suggests it may be substantial. It is suggested that these cells correspond to non-microglial macrophages of brain tissue and, because of their significant down-regulation, they may be difficult to detect. This may be important in studies of brain accessory immune cells in tissue culture.     

The Oxidative Inactivation of Tissue Inhibitor of Metalloproteinase-1 (TIMP-1) by Hypochlorous Acid (HOCl) is Suppressed by Anti-Rheumatic Drugs

Tissue inhibitors of metalloproteinases (TIMPs) prevent uncontrolled connective tissue destruction by limiting the activity of matrix metalloproteinases (MMPs). That TIMPs should be susceptible to oxidative inactivation is suggested by their complex tertiary structure which is dependent upon 6 disulphide bonds. We examined the oxidative inactivation of human recombinant TIMP-1 (hr TIMP-1) by HOCl and the inhibition of this process by anti-rheumatic agents.

TIMP-1 was exposed to HOCl in the presence of a variety of disease modifying anti-rheumatic drugs. TIMP-1 activity was measured by its ability to inhibit BC1 collagenase activity as measured by a fluorimetric assay using the synthetic pEptide substrate (DNP-Pro-Leu-Ala-Leu-Trp-Ala-Arg), best cleaved by MMP-1.

The neutrophil derived oxidant HOCl, but not the derived oxidant N-chlorotaurine, can inactivate TIMP-1 at concentrations achieved at sites of inflammation. Anti-rheumatic drugs have the ability to protect hrTIMP-1 from inactivation by HOCl. For D-penicil-lamine, this effect occurs at plasma levels achieved with patients taking the drug but for other anti-rheumatic drugs tested this occurs at relatively high concentrations that are unlikely to be achieved in vivo, except possibly in a microenvironment. These results are in keeping with the concept that biologically derived oxidants can potentiate tissue damage by inactivating key but susceptible protein inhibitors such as TIMP-1 which form the major local defence against MMP induced tissue breakdown.     

ECM Protein Nanofibers and Nanostructures Engineered Using Surface-initiated Assembly

The extracellular matrix (ECM) in tissues is synthesized and assembled by cells to form a 3D fibrillar, protein network with tightly regulated fiber diameter, composition and organization. In addition to providing structural support, the physical and chemical properties of the ECM play an important role in multiple cellular processes including adhesion, differentiation, and apoptosis. In vivo, the ECM is assembled by exposing cryptic self-assembly (fibrillogenesis) sites within proteins. This process varies for different proteins, but fibronectin (FN) fibrillogenesis is well-characterized and serves as a model system for cell-mediated ECM assembly. Specifically, cells use integrin receptors on the cell membrane to bind FN dimers and actomyosin-generated contractile forces to unfold and expose binding sites for assembly into insoluble fibers. This receptor-mediated process enables cells to assemble and organize the ECM from the cellular to tissue scales. Here, we present a method termed surface-initiated assembly (SIA), which recapitulates cell-mediated matrix assembly using protein-surface interactions to unfold ECM proteins and assemble them into insoluble fibers. First, ECM proteins are adsorbed onto a hydrophobic polydimethylsiloxane (PDMS) surface where they partially denature (unfold) and expose cryptic binding domains. The unfolded proteins are then transferred in well-defined micro- and nanopatterns through microcontact printing onto a thermally responsive poly(N-isopropylacrylamide) (PIPAAm) surface. Thermally-triggered dissolution of the PIPAAm leads to final assembly and release of insoluble ECM protein nanofibers and nanostructures with well-defined geometries. Complex architectures are possible by engineering defined patterns on the PDMS stamps used for microcontact printing. In addition to FN, the SIA process can be used with laminin, fibrinogen and collagens type I and IV to create multi-component ECM nanostructures. Thus, SIA can be used to engineer ECM protein-based materials with precise control over the protein composition, fiber geometry and scaffold architecture in order to recapitulate the structure and composition of the ECM in vivo.     

In vitro culture of human chondrocytes (1): A novel enhancement action of ferrous sulfate on the differentiation of human chondrocytes

Chondrogenic differentiation of mesenchymal cells is generally thought to be initiated by the inductive action of specific growth factors and depends on intimate cell-cell interactions. The aim of our investigation was to characterize the influences of basic fibroblast growth factor (bFGF) and ferroussulfate (FeSO₄) on proliferation and differentiation of human articular chondrocytes (HAC). This is the first report of the effects of FeSO₄ on chondrogenesis of HAC. Multiplied chondrocytes of hip and shoulder joints were cultured in chondrocyte growth medium supplemented with bFGF, FeSO₄, or both bFGF + FeSO₄ for4weeks. A 20 μl aliquot of a cell suspension containing2 × 10⁷ cells ml⁻¹ was delivered onto each well of 24-well tissue culture plates. Cells cultured with the growth medium only was used as a control. Alamar blue and alcian blue staining were done to determine the chondrocyte proliferation and differentiation, respectively, after 4 weeks. The samples exposed to bFGF, FeSO₄, and combination of both indicated sufficient cell proliferation similar to the control level. Differentiations of the HAC exposed to bFGF, FeSO₄,and bFGF + FeSO₄ were 1.2-, 2.0-, and 2.2-fold of the control, respectively. Therefore, chondrocyte differentiation was significantly enhanced by the addition of FeSO₄ andbFGF + FeSO₄. The combined effects of bFGF and FeSO₄ were additive, rather than synergistic. These results suggest that treatment with ferrous sulfate alone or in combination with basic fibroblast growth factor etc, is a powerful tool to promote the differentiation of HAC for the clinical application. This revised version was published online in August 2006 with corrections to the Cover Date.     

<Emphasis Type="Italic">In vitro</Emphasis> selection and regeneration of chrysanthemum (<Emphasis Type="Italic">Dendranthema grandiflorum</Emphasis> Tzelev) plants resistant to culture filtrate of <Emphasis Type="Italic">Septoria obesa</Emphasis> Syd

Callus cultures derived from leaf segments of chrysanthemum cultivar ‘Snow Ball’ which was susceptible to Septoria obesa were successfully used for in vitro selection for resistance to this pathogenic fungus. Resistant cell lines were selected by culturing callus on growth medium containing various concentrations of S. obesa filtrate. Resistant calluses obtained after two cycles (30 d each cycle) of selection were used for plant regeneration. About 30% of the plants regenerated from the resistant calluses and 70–80% of the plants raised from cuttings had acquired considerable resistance against the pathogen in the field. No phenotypic variation was observed in the selected regenerates.     

Field performance of micropropagated,macropropagated, and seed-derived propagules of three Eucalyptus grandis ortets

Tree size, survival, and coppicing of micropropagated plantlets, macropropagated cuttings, and seedlings of Eucalyptus grandis Hill ex Maiden were monitored through 57 months in a study in southern Florida to assess propagation options. Two plantlet lines developed by direct micropropagation and orchard open-pollinated seedlings from three ortets were compared in the main study. Rooted cuttings from up to four ramets of each of the three ortets and another ortet were examined in an adjacent supplemental study. Freezes at six and 16 months killed most initial and first-coppice stems to the ground. Most developmental differences in the main study were consistent from ages 2 to 57 months. Propagation by ortet interactions were observed beginning at 21 months, due to the poor performance of seedlings of one ortet after the second freeze. At 57 months, no differences in tree height, DBH, volume, or survival were detected between plantlet lines and between rooted cuttings and plantlets, but seedlings were inferior to plantlets and cuttings. Vegetative propagules had more uniform tree size at every age, with typically less than one-half the variability observed among seedlings. Even though plantlets and cuttings may be more expensive to produce, they have numerous advantages over seedlings for E. grandis plantation establishment in Florida.